Single channel built-in power MOS full bridge drive
Drive forward, backward, stop and brake functions
Built-in hysteretic heat effect overcurrent protection function
Low on-resistance (0.5Ω)
Maximum continuous output current up to 0.9A, peak current 2.3A
The package is SOT23-6

Low voltage motor drive
Electronic toy robot

    Note: C1 (100nF) capacitor in the figure is preferentially connected to the motor, and placed on the PCB when it is inconvenient to connect the motor. C2 in the application of 3V power supply is recommended to use 1uF or above; 4.7uF or above is recommended for 4.2V-4.6V applications; In 6V applications, it is recommended to use 10uF or above when the chip capacitor is placed near the VDD pin of the IC and the connection between the negative terminal of the capacitor and the GND terminal of the IC should be as short as possible. That is, although the capacitor is close, the wiring and wiring are wound very far. Please refer to the following PCB layout diagram.