Service Hotline: 13823761625

Products

Contact Us

You are here:Home >> Products >> Charge manageme... >> Switch voltage ...

Switch voltage rise and fall

XYT4257B

    XYT4257B is a two-section lithium battery boost charge management IC with high integration and reliability. The XYT4257B charging current can be configured with external resistances, and the charging system integrates three loops: input adaptive loop, constant voltage output loop, and constant current output loop, providing excellent performance for the charging system. The XYT4257B‘s boost switch charge converter operates at 650KHz with a maximum 2.0A input charge and a conversion efficiency of 89%. The XYT4257B has an input voltage of 5V and a built-in adaptive loop to intelligently adjust the charging current and match all adapters.
    XYT4257B integrates power MOS and adopts asynchronous switching architecture, so that it requires few peripheral devices in application, which can effectively reduce the overall solution size and reduce BOM cost. The XYT4257B integrates complete protection functions: input overvoltage, input undervoltage, output short circuit, output overvoltage and chip overtemperature protection.
    XYT4257B summarize:
        XYT4257B is a two-section lithium battery boost charge management IC with high integration and reliability. The XYT4257B charging current can be configured with external resistances, and the charging system integrates three loops: input adaptive loop, constant voltage output loop, and constant current output loop, providing excellent performance for the charging system. The XYT4257B‘s boost switch charge converter operates at 650KHz with a maximum 2.0A input charge and a conversion efficiency of 89%. The XYT4257B has an input voltage of 5V and a built-in adaptive loop to intelligently adjust the charging current and match all adapters.
        XYT4257B integrates power MOS and adopts asynchronous switching architecture, so that it requires few peripheral devices in application, which can effectively reduce the overall solution size and reduce BOM cost. The XYT4257B integrates complete protection functions: input overvoltage, input undervoltage, output short circuit, output overvoltage and chip overtemperature protection.
        The XYT4257B is available in a small ESOP8 package with a rated operating temperature range of -40 ° C to 85 ° C.

    XYT4257Bpeculiarity:
    The input voltage ranges from 3.6V to 5.5V
    5V, 2.0A input asynchronous switch boost charging
    Trickle/constant current/constant voltage charging
    Built-in power MOS
    The boost charging efficiency can reach 89%
    The charging current is externally adjustable
    Input adaptive charging, matching all adapters
    650KHz switching frequency, can support 2.2uH inductance
    Support LED charging status indication
    Output overvoltage, short circuit protection
    Input undervoltage, overvoltage protection
    OTP overtemperature protection
    MPL maximum power limit

    XYT4257BApply:
    Two-section series lithium battery charging
    walkie-talkie
    Bluetooth speaker
    Electronic cigarette
    Power tool

    XYT4257B封装形式:
    ESOP-8

    XYT4257B典型应用电路图:
    XYT4257B PCB Layout设计注意事项:
    (1)电源端走线设计需尽可能的宽,且要单独从电源端走线给XYT4257B供电。
    (2)电源端电容需尽量贴近芯片放置。
    (3)SW脚的走线设计需尽可能的短,有利于降低EMI。
    (4)肖特基二极管与电感的连线需尽可能短且粗,防止过孔跳线。
    (5)BOOST模块中主要电流回路走线设计需尽量的短且粗。
    (6)因芯片底部散热片为功率地,需将其与大面积的地相连接,且焊接时需将底部散热片和地可靠连接。

    XYT4257B PCB Layout布线参考图:
    XYT4257B引脚定义及说明:

    XYT4257B功能框图:
    Please submit your basic information and send an email Sales@ChipSourceTek.com , or call us at 13823761625 (the same number as wechat), and we will contact you as soon as possible!

    *

    *

    *

    *

Related products

Baidu
map